problem with my 3 brake light
Led's require such low voltage to run that they'll pull off the residual voltage in the line or a trickle feed for hours. Usually minuscule power traveling through the system somewhere, and they'll pull off of that. If its bugging you that much, throw a resistor on them. No need to worry about them draining your battery.
There is your problem. LED bulbs will draw a very small amount of current if there is not a regular bulb some where in the system.
The amount of current is very small so you should be Ok.
The fix is to either put a regular build in the brake light system some where. Or wire in a resister.
The amount of current is very small so you should be Ok.
The fix is to either put a regular build in the brake light system some where. Or wire in a resister.
Also sounds like have a ground short, a power wire is shorting to the truck body, it's not a huge problem, but a real bitch to trace every wire, or you can pull and replace fuses one at a time, if that light goes out you found the short, if not it is a major component.

