So me and a buddy were riding Down the road the other day and when he went to roll his window down, it didn't roll down. I thought it was the motor but I can still roll his window down from the driver side. Is the switch bad or what?

 

Anyone?

 

Maybe you have the lock switch on? Or maybe its just a bad switch. There are threads on how to clean them, or just buy a new one.

 

its a definate possibility that the lock was on, but since he couldnt energize the switch and you could from the master switch. the passenger window switch is more than likely out, so do your diagnosis on the passenger window only. you wouldnt beleive how many ppl are dumb enough to work on a window that has no problems

 

before going to change the switch......check ur door jams for cut wires!!! i had the same issure opposite though...driver door wouldnt put r passenger window up but passenger switch worked fine....found one of the white wires cut clean in half...burried in the loom. look for a schematic and ohm them out....if theres a cut wire...u'll find it

 

It's probably the switch same thing happened to me

 

my passenger window has mechanical resistance on it, need to get some window grease for it