Opening window switch
#1
Opening window switch
So after reading countlesd threads on drive window issues, and lots of folks are saying to clean the contact points, but how do i gain accesd to them!?
Can i just remove the button? Or do i actually need to open the box connected to the buttons.
Im havin trouble opening the box, but i might be missing something. My warranty will cover it, but the appt is not till next week.
Can i just remove the button? Or do i actually need to open the box connected to the buttons.
Im havin trouble opening the box, but i might be missing something. My warranty will cover it, but the appt is not till next week.
#2
Senior Member
there is a thread on how to do the whole thing from start to finish with pics the button has to come off (just pry it up) then there is a clear rubber boot that comes off then the contacts should b rite there..
#3
Big Kahuna
I just did Cleaned mine this weekend, your most of the way there, just pop off the switch covers, they just snap on, then remove the little clear weather propfing rubber. Then pry all 4 tabs on the sides, kinda tricky got to do all at the same time, I shoved a tooth pick under each one, when it comes apart the contacts are visible and can be cleaned.
Oh yea you don't have to remove the button for the widow lock, it's attached differently but won't get in the way.
There is a good write up somewhere I googled "f150 window switch fix" and was able to find it pretty easy. Good luck!
Oh yea you don't have to remove the button for the widow lock, it's attached differently but won't get in the way.
There is a good write up somewhere I googled "f150 window switch fix" and was able to find it pretty easy. Good luck!