Only two sensors?
#1
Junior Member
Thread Starter
Only two sensors?
2006 King Ranch - All stock
The harness that connects at the rear then goes to the sensors is missing. I want to get this reconnected but all the harness' I have seen are for 4 sensors not 2. The picture is NOT my truck but only for reference.
The harness that connects at the rear then goes to the sensors is missing. I want to get this reconnected but all the harness' I have seen are for 4 sensors not 2. The picture is NOT my truck but only for reference.
#2
Senior Member
Have you owned the truck since new? If not, the bumper was likely replaced using the one that doesn't have sensor cutouts.
#3
Junior Member
Thread Starter
No I have not owned since new. Would the system work with only two connected or does the module need communication from all 4 to work properly.
#4
Mark
iTrader: (1)
Needs all 4 to work