offset -24???
#1
Junior Member
Thread Starter
Join Date: Jul 2012
Location: 305
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
offset -24???
This week i went to try to get some new rims(fuel offroad Throttle) 20x10 with 305/55/20 terra or 33x12.5x20r. At the rim shop the guys was telling me that the offset -24 will rub. He wanted me to get the -12 offset ones. But was not convinced. after reading all these forums guys are putting 35 and they have no problems with rubbing and having the same set up i have 2.5 leveling kit on 4x4. Can some one confirm -24 offset will rub or not. thanks
#3
I Like Tires
-24 offset on a 10" wide rim is the same back spacing as -12 on 9" wide wheels which is a more common combination. The 9" wide wheels don't rub so you should be fine as far as clearance with the upper control arm, frame, etc. it's just that extra inch of wheel sticking out past the fender and the extra inch of tire that comes with it that may rub and cause you to hit the fender/body.
Hard to say which is worse. A -12 on a 10" wide wheel may bring you to close to the UCA or frame. Maybe check with your local Discount Tire and see if they have this combo of wheels in stock and get a test fit?
Hard to say which is worse. A -12 on a 10" wide wheel may bring you to close to the UCA or frame. Maybe check with your local Discount Tire and see if they have this combo of wheels in stock and get a test fit?
Last edited by BassAckwards; 08-13-2012 at 04:13 AM.
#4
Junior Member
Thread Starter
Join Date: Jul 2012
Location: 305
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
thank guys just got back from the rims shop. But no luck testing any of these. There were not in stock. so he order 20x9 and 20x10-12. they should be here tomorrow. Ill will let you guys know which on has no rubbing.