New camo 4x4 sticker
#11
~Chillin on a Dirt Road~
Thread Starter
Originally Posted by jn_h
I agree with you completely. Here's a few pics of my realtree accents...
#12
~Chillin on a Dirt Road~
Thread Starter
Actually just poked around on here and found a guy who got a camo vinyl overlay for the decal, painted the decal black and cut the ford out. I'll do that. Looked sharp
#18
Senior Member
I agree with you completely. Here's a few pics of my realtree accents...
Attachment 143245
Attachment 143246
Attachment 143247
Attachment 143248
Attachment 143245
Attachment 143246
Attachment 143247
Attachment 143248
#20
1. Make sure you have the 2 piece badges. It makes it way easier...
2. Buy your favorite color vinyl/camo vinyl.
3. Take apart the badges (the chrome should separate from the black.
4. Sand down the black pieces flat and as smooth as possible.
5. Cut out a sheet of vinyl to cover the black insert. Then lay it over, smooth it out and begin trimming around the letter and numbers with a razor blade or xacto knife.
6. Once it's all trimmed fold the edges down over the letter and numbers. Then put it back together.
7. If desired you can sand and paint the chrome while its all apart.
Like I said the 2 piece badges are the easiest. That's how I did all of mine. I can't speak for the 1 piece badges.
2. Buy your favorite color vinyl/camo vinyl.
3. Take apart the badges (the chrome should separate from the black.
4. Sand down the black pieces flat and as smooth as possible.
5. Cut out a sheet of vinyl to cover the black insert. Then lay it over, smooth it out and begin trimming around the letter and numbers with a razor blade or xacto knife.
6. Once it's all trimmed fold the edges down over the letter and numbers. Then put it back together.
7. If desired you can sand and paint the chrome while its all apart.
Like I said the 2 piece badges are the easiest. That's how I did all of mine. I can't speak for the 1 piece badges.