Need a little help
Thread Starter
Junior Member
Joined: Dec 2011
Posts: 5
Likes: 0
Need a little help
i have a 2006 f150 5.4l 3 valve, after it gets warmed up you put into gear then tip in throttle and let off acts like it only runs on half the engine. i have already changed phasers, solenoids, and timing chain tensioners. if i disconnect one of the solenoids it runs fine. any suggestions would be great....and there are no codes.
jeff
jeff
Last edited by NHRA3637; Dec 8, 2011 at 05:38 PM.
Senior Member
Joined: Jul 2011
Posts: 3,380
Likes: 503
From: Tonopah. AZ.
Did you pull any codes or just tear into it? somthing that drastic should show up on the computer even if it didnt trip the MIL light Bubbabud. sorry I didnt see the part about the codes the first time I read your post.
Last edited by bubbabud; Dec 8, 2011 at 05:43 PM.
Thread Starter
Junior Member
Joined: Dec 2011
Posts: 5
Likes: 0
i haven't had any codes at all. the tensioners had blown seals. i hoped by getting them replaced it would solve the problem. i blew through all the holes for cam and solenoid body. i thinking poss oil pressure problem. and if i disconnect bank 1 solenoid it runs fine
Last edited by NHRA3637; Dec 8, 2011 at 07:11 PM.