I dont really know what i want to do I got an 07 lariet ex cab bone stock tires wheels and all. Should I do a 2.5 or 3 inch kit I kinda wanted a mini bulldog look but im not sure any suggestions are appreciated.

 

A 2.5 inch kit should get you leveled, meaning front and rear are even. A 3 inch kit should make the front sit slightly higher...almost like you've got a load in the bed or your romping on the throttle! What you like and decide on is up to you...personal preference.

 

yeah im thinking just the 2.5 if i went to the 3 would it be any worse on my ball joints and control arms and what not

 

I really couldn't answer that as I still have the stock setup on my vehicle. Although, there are plenty of people on this forum who have been running a level kit for years with thousands of miles logged without any problems. Friendly tip for you, an allignment is needed when lifting or leveling.

 

I used a 3 inch in my truck and yes I'd say it's a bit harder on ball joints but when I replaced them I put lifetime warranty in. With the 3 inch in the front I put 1.5 inch blocks in the back and clear 295/75 tires really well

 

I have the 2.5 Auto Spring w/ 3inch rear blocks.. This kit is more than enough to level and/or add a bit of height.. I could have gotten away with a 2 inch with 35 inch tires..