Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

Lower bumper with round fogs

Thread Tools
 
Search this Thread
 
Old 10-05-2010, 10:11 PM
  #1  
Junior Member
Thread Starter
 
glang25's Avatar
 
Join Date: Oct 2010
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Lower bumper with round fogs

I currently have the 04-05 f150 with the rectangle fogs and I want to buy the bumper with the circular fogs, but I was curious if they fit the 04-05? Looking at some of the bumpers on ebay they list them as for the 06,07,08. Any help?
Old 10-06-2010, 06:23 AM
  #2  
Moderator (Ret.)

 
Mod (Ret.)'s Avatar
 
Join Date: Sep 2008
Location: Lake Mary Florida
Posts: 9,460
Received 475 Likes on 375 Posts

Default

It will fit. The reason the bumper is listed as an 06 and up bumper is this was when the round fog lights replaced the square (starting in 06).

You'll need to buy the new fog lamp assemblies and brackets, as the brackets for the square fogs will not work.

I'd try a salvage yard first. This way you can buy everything at one time, and for much less than new. You'd have to paint either one anyhow (used or new lower bumper).
Old 10-06-2010, 06:45 AM
  #3  
Senior Member
 
Mac113's Avatar
 
Join Date: Feb 2009
Location: New Jersey
Posts: 458
Received 2 Likes on 2 Posts

Default

I've also have really been wanting to do this. Do you need any specially harness to connect the wires from the 05 bulbs to the newly acquired 06 bulbs? Are they the same size bulbs?
If so that would be awesome because then you just need the bumper/brackets/round lights

The reason why I want to do this is because the rectangle lights get to much water and dirt in there and I hate replacing the bulbs all of the time!

If you can get back to me that would be awesome!

Thankss!!!!
Old 10-06-2010, 10:05 AM
  #4  
poopin.....on this thread
 
rubbinsracin's Avatar
 
Join Date: Sep 2010
Posts: 1,008
Received 33 Likes on 29 Posts
Default

thats funny to me....i always liked the rectangle fogs and that is the reason i bought an 04 instead of the 06 that i had been looking at. Id try salvage yards first too. even if you have to have it shipped in from another salvage yard it would still be cheaper than buying it new. are you looking to go w/ a chrome or painted?
Old 10-06-2010, 10:10 AM
  #5  
Administrator


 
Lenn's Avatar
 
Join Date: Oct 2008
Location: Honolulu, HI
Posts: 15,047
Received 1,688 Likes on 590 Posts

Default

Originally Posted by Mac113
The reason why I want to do this is because the rectangle lights get to much water and dirt in there and I hate replacing the bulbs all of the time!
Sounds like you have a chip/hole in your lens. Pull them out, seal them up with clear silicone caulk around the glass edge and reinstall them. Also make sure and check your bulbs. If they are not seated properly, they will allow contamination into the housing.
Old 10-06-2010, 11:55 AM
  #6  
Senior Member
 
Nobman's Avatar
 
Join Date: Jul 2010
Location: Detroit area
Posts: 952
Received 24 Likes on 18 Posts

Default

Well I have a 2007 with the round fogs and they have been corroded also... So I just sealed them up nice and used alot of Di-Elecetric grease.
Old 10-06-2010, 12:43 PM
  #7  
Member
 
VanoFord's Avatar
 
Join Date: Jan 2009
Location: The Woodlands, Tx
Posts: 1,814
Likes: 0
Received 7 Likes on 6 Posts
Default

Originally Posted by Bucko
It will fit. The reason the bumper is listed as an 06 and up bumper is this was when the round fog lights replaced the square (starting in 06).

You'll need to buy the new fog lamp assemblies and brackets, as the brackets for the square fogs will not work.

I'd try a salvage yard first. This way you can buy everything at one time, and for much less than new. You'd have to paint either one anyhow (used or new lower bumper).
I thought the 04-05 had the bumper brackets changed compared to the 06-08. I thought 04-05 were on the inside of the frame, and the 06-08 moved to the outside. I know you CAN NOT use a rear bumper from an 05 on an 06+ for this reason (had to fab up a custom mount bracket to get an 05 to work on my 06) so I assume it is the same for the front bumper. Can anyone verify?
Old 10-06-2010, 09:34 PM
  #8  
Senior Member
 
wyattjo's Avatar
 
Join Date: Dec 2009
Location: High River, Alberta, Canada
Posts: 141
Likes: 0
Received 3 Likes on 3 Posts

Default

i'd be interested to know as well since i'd like to put the 06+ bumper on mine
Old 10-07-2010, 01:07 AM
  #9  
Senior Member
 
rick99601's Avatar
 
Join Date: Dec 2008
Location: Westland, MI
Posts: 516
Likes: 0
Received 2 Likes on 2 Posts

Default

i wanted to do the same thing for when i first got my '05. the rectangle lights grew on me though.
Old 10-07-2010, 07:13 AM
  #10  
Senior Member
 
Mac113's Avatar
 
Join Date: Feb 2009
Location: New Jersey
Posts: 458
Received 2 Likes on 2 Posts

Default

Yea I'm most likely just gonna have to pull them apart, clean them, seal them, and order some new hids ; )
Thanks guys I appreciate all of the replies!!


Quick Reply: Lower bumper with round fogs



All times are GMT -4. The time now is 07:07 PM.