2008__XL

Agreed. The ricer look has no place being on an F150.

hahanson

I don't think those are actually complete light assemblies. They're flexible LED tubes and you have to remove the lenses to install them.. I'll look and see if i can find the link; I can't remember what they are called off the top of my head....

EDIT:

They're from a company called XKGlow. Here's a video of one of this forum member's truck:


Here is more info from XGlow's website:

http://www.xkglow.com/XKGLOW_Sequent...p/xk043001.htm

Hope that helps.

BadFish523

These are my stockers with a switch back flexible LED strip attached with 3m emblem tape. I'm pleased.

hahanson

You must have some down home type folks in Nebraska that aren't going to walk up and remove them from your truck while you're in getting groceries (or a beer at the local pub)!

BadFish523

Very rural, but there is still some crime. I don't think most people around here even know you can remove them.

hahanson

Ha! You're probably right!

So did you wire them to your DRL circuit? And do they also connect to the TS circuit & turn amber and move sequentially like the XKGLOW above?

1930ford

I've decided that I'm gonna go with u bar headlights. It's the closest thing I can find without having to pay an arm and a leg or build my own. Thanks for all the input guys!

BadFish523

I don't have drl and I did connect them to the TS and the turn amber but not sequential.

Stangconv

Can I see some closer pics? Also where are the wired into?

Summers22

iTrader: (2)

You can buy the assemblies already done.

http://www.ebay.com/itm/Black-2009-2...tWcwU4&vxp=mtr
http://www.ebay.com/itm/Pair-Eagle-E...VXjsi1&vxp=mtr