has anyone installed 1.5 inch lifting blocks on a 4x2? if so how did that go? i tried to sunday but had trouble getting the pins to line up with the block. help please!!!

 

takes some muscle to maneuver the axle into aligning back up.

 

loosen a four u-bolts (only enough for axle to move around, not enough for the block to fall out.) by doing this when you take off one side of the u-bolts and add the block, you will be able to swing the axle forward or backward enough to line up the pins.

 

ok... thanks guys for the feedback. makes sense to me and i'm bolstered for another try with the new info. saturday autospring blocks are going on!!