leveling kit, before and after
Those are 305/65/17 on there no rubbing issues other than on the junk factory running boards but a little trimming took care of that. This years job is getting rid of those factory running boards
Did you use the blocks in the back also or did you leave them out also?
I used the 3" in the front and the blocks in the back to raise it 1" past stock. I will try in the next couple days to get it out and get better pictures of it. I bought the same exact setup that you posted with the link off ebay.
Ok got some pictures of it today not clean that will be this weekend. This is the 3" in the front lift and raised the rear up 1" inch with the blocks that were in the kit. I measured the front and rear and the rear sits 3/8 higher than the front which I'm ok with.
I haven't noticed any changes in the ride but to have a fair comparison I guess I would have to put my stock tires back on to compare it. I Put the lift on and the tires all in the same day. Bigger tires changes the ride all by them self's.
Last edited by geb63619; Mar 19, 2011 at 12:50 AM.



