Leveling kit.
#1
Junior Member
Thread Starter
Join Date: Jan 2010
Location: Louisville, Ky
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Leveling kit.
Question. I just purchased an 04 f150 FX4 ( Not Heritage) I would like to purchhase the 2 1/2" leveling kit that bolts on the top of tower without strut dissasembly. Will I have to have truck realigned ? will this cause truck to catch more air at highway speeds, and effect controle of vehicle. After changing the oil I believe there is not alot of front end clearance. And the taller stance would look great. I would appeciate your opinions THX !
#2
vdubber
Join Date: Dec 2009
Location: Vancouver BC Canada
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
2.5 inch level is a great stance on these trucks, i have one on my 06 and i haven't noticed the truck catching more air or anything. it just feels taller. Because i have an 06 the 2.5 was a bit too much so i needed to put a 3 inch block in the rear to bring back a slightly ranked stance
#3
heres what i just ordered ........its a 3 inch HBS(hell bent steel) leveling kit...(most people do a 2.5 inch...i just wanted more ground clearence)....almost everyone on here has a HBS leveling kit....bought mine off ebay...there 69 bucks shipped to your house and if you order it from them on this link.... i ordered it wednesday they said it would be here on monday...but it was at my house friday....its powdercoated and looks really good... you dont have to disassemble your spring....you just unbolt it and bolt on the kit.. and then bolt everything back together.... any questions just ask
http://cgi.ebay.com/ebaymotors/2004-...Q5fAccessories
http://cgi.ebay.com/ebaymotors/2004-...Q5fAccessories
#4
curious member
I'm workin right now but when I get home I'll hook you up with som befor 2.5 leveling kit after kit then after 33in tires the tires make it stand perfect for me
#7
Senior Member
Question. I just purchased an 04 f150 FX4 ( Not Heritage) I would like to purchhase the 2 1/2" leveling kit that bolts on the top of tower without strut dissasembly. Will I have to have truck realigned ? will this cause truck to catch more air at highway speeds, and effect controle of vehicle. After changing the oil I believe there is not alot of front end clearance. And the taller stance would look great. I would appeciate your opinions THX !
Trending Topics
#9
I drove mine for a long time before I did one and didn't wreck my tires or anything though.
#10
Senior Member
You don't NEED to do anything. That is up to you. You could not level and put 38 inchers on if you would like. If you want to maybe save some tire wear and ball joint problems, then you might posibly want to allign it after a level kit of any height.