i just put my 3 in level in and it didnt make it level eithere but that is fine with me still looks alot better than it did but what someone already said every truck is different just depends on your frontend if anything is wore out mine has old struts so that is why mine isnt level

 

Do you guys possibly have an add a leaf? Two inch level brought my 06 4wd dead level with stock rear.

 

yea, I put a 2.5 on mine and the front sits a tad bit higher than the rear. If you are saying a 3'' doesnt even bring you up to your rear then somethings up. I understand all trucks are diff, but 3'' should be more than enough. Are you original owner? Like someone else said, add a springs or worn out?

 

i had the 2.5 on and it didnt set it level, so then i put the 3 but that still didint, i have 90,000 on the truck it has been aligned and there are no rear blocks or an add a leaf. could the front end be worn out? would buying new spring do the trick?

 

Do you have a heavy half ton (7 lug nuts)? I have a regular half, 06 5.4L Screw with 2 long leaf springs and and one short. I added a 2.5" HBS level and my front was up a half to 3 quarter inches high, so I added a Pro Comp AAL, which wouldhelp be 3 long leaves and 1 short. Hope this helps.

 

Thats crazy i have the 3" on my 08 with 52,000 miles and that made my front just a little bit higher. Maybe new front springs might do the trick..

 

I got a 3" and I'm bulldogged. But I got a 2wd so.

 

I have the scab 1/2 ton nothing is added to the back. I just think the front springs are wore out. Cuz I heard a 3 would make it nose high, but it isn't. So what the cheapest rout to fix this

 

add some blocks to the rear...

 

did you get an alignment? that is were the hight is at so to speak