sabbatini69

hey guys i seem to be having some problems with engagment and disengageing in my 4x4 i just replased the solinoid vacum lines and actuaters and im still not getting the problem thanks if some one can help with this sitiation

Brutus442

You mentioned you replaced the solenoid vacuum lines but did you check the solenoid itself for operation?

Does the 4X4 light up on the dash when you operate the switch?

It may only be the 4x4 transfer switch actuator under the cab needs a polite tap to get going again.

sabbatini69

well the solinoid is working and the vacum lines are new so i dont know what to do i have a manuel shift so i dont know where the 4x4 transfer switch is

sabbatini69

hey guys i dont know if anyone has the problem i dont know what happen but i broke the end off the the plug in on my solinoid for the actuaters is called a solinoid

Brutus442

The transfer switch is on the dash between the steering wheel and radio. If the solenoid is damaged I'm not sure if it will illuminate, but I'd start by replacing the solenoid either way. During removal of the broken solenoid, I'd test the vacuum lines before installing the new solenoid.

PerryB

Also apply punctuation, your writing is impossible to follow.