Interior door threshold piece
Thread Starter
Member
Joined: Aug 2011
Posts: 75
Likes: 5
From: Southwest
Interior door threshold piece
Did a search but could not find anything about taking the 'plastic' threshold piece out. I need to take it out to replace the rubber door seal piece.
Thanks in Advance . . .
Thanks in Advance . . .
massart
Joined: Aug 2011
Posts: 349
Likes: 6
From: brussels, wi
if your talking about the middle trim that you step on its held in by plastic clips just pull it straight up. i took mine out to run wires down the sides to the back seats for some lights. it just pulls out
Thread Starter
Member
Joined: Aug 2011
Posts: 75
Likes: 5
From: Southwest
Thanks for the info. I should have mentioned this in my first posting - this is the rear door but I would assume that it would be the same - just pulling it straight up.
Senior Member
Joined: Sep 2011
Posts: 447
Likes: 1
Yes they pull up, just start at one end and pull it up but don't bend it and make it crease. Then they just snap back down.