I am trying to track down a water leak from my firewall on the passenger side. I have read there is a weld seam that leaks and you have to remove the fender to gain access to seal it. How do you remove the fender?

 

remove inner plastic fender. (you can play around without removing it completly)
open the hood, remove headlight,
remove fender bolt behind it and on top of the rail(inside the hood), inlcuding the hood strut stud.

from the inside of the wheel well:
remove bolt from the forward bracket close to where it meet the bumper
remove the rubber deflector on the cab side and the bolt behind it. (disconnect the antenna cable)

remove lower bolts (under near the door)
remove last bolt from that you can see from the door opened.

 

Everything was easy except the antenna cable. It won't disconnect. Is there a certain way to remove it?

 

Nevermind I got it off. Now if i only knew where the leak was coming from!