I am going to purchase a set of brand new wheels and need some help. I have an 04 4x4 Screw and very little knowledge of vehicles. I am going to put a leveling kit on the truck and want to purchase 22' rims. Do I need to worry about things like backspacing, offset and hubcentric? I found a site with dirt cheap wheels and don't wanna pass them up. Any help is appreciated. Do you need any other info?

 

what kinda tires are you putting on it. are they gonna be an off road tire or a low profile street tire?

 

I may have to go with a street tire first because of $ but would hope to eventually put on a set of terra, bfg a/t or cooper zeon. This is the wheel I wanna buy:

PXA6009-22936-1

Pro Comp Xtreme Alloy 22x9.5, 6 on 135 Bolt Pattern

• Bolt Pattern: 6 on 135
• Diameter: 22.00 "
• Width: 9.00 "
• Style: 09 Series
• Finish: Chrome
• Construction: Aluminum
• Backspace: 6.43 "
• Max Load: 2200 lbs
• Hubcentric: No
• Offset: 30 mm

But I could go with a 20' rim if I needed to.

 

as long as your not putting an oversized tire on it, the backspacing and all that wouldnt matter. if you go to put a 33" or bigger on, then yea, it will matter.

 

i can get the wheels for $300 shipped to my door and want to put bigger tires on eventually...i just dont want to pass up the wheels.. its too good of a deal