Im wiring in my pioneer double din. Bought the harness for easy wiring. It will only turn on when red/yellow are both connected to the yellow 12v constant. But then i cant turn it off. Any ideas why the red ignition wont turn my stereo on?. Everything works fine if its all wired to constant

 

Anyone know what color the switched 12v wire is? Cant figure this out

 

If no one answers you I'll pull mine out of the dash and tell you

 

Thanks man. I bought the harness but it wont work for my 12v switch and my battery will die if its always constant 12v. Id rather not run a fused wire from the fuse box

 

Here you go. The red arrow points to the switched 12v wire. Green w/yellow stripe. The green with black stripe is constant power and the black with green stripe is ground.

 

Thanks so i went to use that wire and im getting nothing. I must have a blown fuse. Does anyone know what number the fuse is