Got a question your all you guys?
#1
Senior Member
Thread Starter
Got a question your all you guys?
I have a 2006 ford f150 screw, i want to swick out my interior or at least my seats and console, iIhave a 40/20/40 front seat. I would like to start out with my console. Would it be possible to take out the middle "20" and put in a full center console? If so where is the best place to get them. I have looked on ebay and they dont have any gray ones that havent been beaten to crap.
thanks guys
thanks guys
#3
Senior Member
Thread Starter
i would rather have the one with the shifter in it but i dont know how hard it would be to run all the shifter stff the it, so i would make do with just the smaller one that doesnt have a seat in the middle.
this is what i want but gray
this is what i want but gray
#4
Senior Member
I think the middle seat is on the same track as the right passenger seat. You may have to replace that seat with a bucket seat for the console to mount flush to the ground. My knowledge (or lack thereof) comes from a test drive in an F150 with the bench. So I could be wrong.
#5
Senior Member
The center portion is not part of the RH seat. You can just take it out and put in one of those consoles. The console with the shifter also has a different IP. or part of it.
Trending Topics
#9
2020 Sport
ebay or post here asking for a trade. I had the seat and another member had the console and we did an even swap and I shipped and so did he. Of course if you do that you will pay more for the shipping because that middle seat weighs a F'in ton.