Hello everyone! A while back I had to change my fuel pump, no biggy. Let me give a little back ground, now my check engine light has been on for an EVAP leak, and now i think i know why. Apparently the pump has been changed from the previoys owner. I noticed because the clips that hold the connectors on have been broke, and they are hold on by some cheap plastic retainers. I want to replace them and reinstall the connectors the right way, and hopefully get that light to stay off for good. It does not leak running fuel, and they do stay pretty secure apparently.
But searching for the right clips, have been difficult lol. Will i have to buy them directly from ford? Or worse, will i need to replace the whole line? They are the 90 degree rubber connectors i am talking about. Have been debating going to pick and pull as well.

 

I use pick and pull all the time but beware, many pick and pull yards cut the fuel lines when and if they remove tanks or fuel pumps.

 

thats what i was thinking. pick and pull may be my best bet. may if i can just pull the 90 degree connectors off id be good