Hey guys I sold another member my old edge evo and now he says it does this whenever he tries to adjust for tire size.

This happened to me once or twice when i owned the unit but all i had to do was unplug the diagnostic cable and plug it back in.

He is not having success with this method. Anyone know why the edge is doing this and saying it needs to be updated when it was able to perform this function before?

 

The first thing I would do is download the fusion software and update the edge.
Hopefully the update will cure the fault issue.

 

ERROR CODE 0xF1 (AFTER PCM READ)


– If you are receiving

this error code right after the

Evolution reads your PCM, check for

updates using the FusionŽ software. If the problem continues, follow

the instructions on page 33 under

Read Stock Calibrations.

ERROR CODE 0xF1 (IN CUSTOM MENU) – If you are receiving

this error code while trying to configure your custom options,

disconnect from the OBDII connector, turn the key to the ON position,

and plug the

Evolution back in. After getting to the main screen (past

Intro and Disclaimer), wait 15 seconds. This will give your unit time

to load parameters it needs to perform the custom changes. You

should now be able to perform your custom changes.