Edge Evo question
#1
.....
Thread Starter
Edge Evo question
If the Edge is set to level 2 and throws a code causing the CEL to come on...can it be set back to stock and keep the CEL on, and retain the code in the system?
#2
Mark
iTrader: (1)
clear the code first and then set it back to stock. you sure the tuner is causing the code ?
#3
.....
Thread Starter
I need the CEL to be on so the dealer can fix it but, it wont throw the code in stock setting. Code is P2006=Intake manifold runner stuck closed(bank 1). Thanks
#4
Mark
iTrader: (1)
then they won't fix it if it don't do it while set to stock...they are not going to pay to fix something your tuner is causing.
#5
.....
Thread Starter
I know that's why I want the code to stay active. It will not stay? or will it?
Can't get it to do it in stock mode-happens when pulling out from a dead stop only on level 2...never put it to level 3.
Can't get it to do it in stock mode-happens when pulling out from a dead stop only on level 2...never put it to level 3.
Last edited by 2nd150; 11-29-2011 at 10:42 PM.