Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

Edge Evo issue

Thread Tools
 
Search this Thread
 
Old May 21, 2016 | 03:30 PM
  #11  
CKsBAT's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2012
Posts: 1,240
Likes: 324
From: Cape Charles Virginia
Default

They suggested return to stock, unplug for a few minutes and reload programs. Now it's bright as it was before the problem. The unit was made in 2011.
Reply
Old May 21, 2016 | 08:13 PM
  #12  
grss429's Avatar
Senior Member
 
Joined: Mar 2015
Posts: 862
Likes: 61
From: North Carolina
Default

Originally Posted by CKsBAT
They suggested return to stock, unplug for a few minutes and reload programs. Now it's bright as it was before the problem. The unit was made in 2011.
it will be bright till it gets hot, i think it's a weak soldier issue
Reply
Old May 30, 2016 | 01:01 AM
  #13  
04_f150's Avatar
Junior Member
 
Joined: May 2016
Posts: 6
Likes: 0
Default

So I know this really don't go along with this too well but I'm having a problem and not sure what to do here I got a edge evo and Went to install it on my 04 f150 5.4 lariat and when I did i put it on one and drove it down the road and it started to spark nock real bad so I pulled off and the check engine light come on and I read the codes and it says that my camshaft position sensor is over retard on bank 1 and 2 and on board diagnostic (obd) systerns readiness test not complete now my truck has no power hardly at top end and idles terrible any ideas??

Thanks a lot!!!
Reply
Old May 30, 2016 | 03:11 AM
  #14  
grss429's Avatar
Senior Member
 
Joined: Mar 2015
Posts: 862
Likes: 61
From: North Carolina
Default

Originally Posted by 04_f150
So I know this really don't go along with this too well but I'm having a problem and not sure what to do here I got a edge evo and Went to install it on my 04 f150 5.4 lariat and when I did i put it on one and drove it down the road and it started to spark nock real bad so I pulled off and the check engine light come on and I read the codes and it says that my camshaft position sensor is over retard on bank 1 and 2 and on board diagnostic (obd) systerns readiness test not complete now my truck has no power hardly at top end and idles terrible any ideas??

Thanks a lot!!!
make sure it's set to stock tune.. try that first
Reply
Old May 30, 2016 | 11:29 AM
  #15  
4.6owner's Avatar
Senior Member
 
Joined: Mar 2016
Posts: 176
Likes: 17
Default

Originally Posted by 04_f150
So I know this really don't go along with this too well but I'm having a problem and not sure what to do here I got a edge evo and Went to install it on my 04 f150 5.4 lariat and when I did i put it on one and drove it down the road and it started to spark nock real bad so I pulled off and the check engine light come on and I read the codes and it says that my camshaft position sensor is over retard on bank 1 and 2 and on board diagnostic (obd) systerns readiness test not complete now my truck has no power hardly at top end and idles terrible any ideas??

Thanks a lot!!!
You already started another thread about your issue. Don't thread crap on this one.
Reply
Old May 30, 2016 | 08:13 PM
  #16  
dcone97's Avatar
Member
 
Joined: Jul 2015
Posts: 78
Likes: 1
Default

Originally Posted by grss429
only reason i care is cause i feel like mine is getting worse.. on theses really hot days like when it's 90 or so in my truck.. i feel like one day it will cut off completely
mine did this the other day and all I did is I went to setting and turned the contrast up one percent and all was good! I have had mine for a year and it's never done that till today!
Reply




All times are GMT -4. The time now is 02:46 PM.