Drivers side mirror broken off
11-16-2017, 05:26 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2017
Location: Ft Lauderdale
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Drivers side mirror broken off
Was driving down the road when another truck veered into my lane, luckily I swerved quick enough to avoid a head on collision. My only problem was my drivers side power mirror was ripped off. Thee bracket is all that survived. The wires are hanging there. I’m looking for a replacement mirror and see OEM parts for 140 and after Market for half that. If I buy a mirror, how do I plug in my wires? Is there supposed to be a plug or is the plug in the mirror? I have 4 wires with a flat connector on the ends. I attached a pic, Any advise? Thanks-
11-16-2017, 05:32 PM
#2
Junior Member
Thread Starter
Join Date: Nov 2017
Location: Ft Lauderdale
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
From what I seen on YouTube, this looks pretty easy to do. My only unknown is the wiring, if it needs a plug or what? Any thought on aftermarket parts?
Last edited by Johnml13; 11-16-2017 at 05:43 PM.
11-16-2017, 08:27 PM
#3
Easiest way to do it will be to pull the door panel, disconnect the wiring harness connector, remove three bolts and replace the whole assembly. Find you a mirror with all of you options (power, heat, puddle light etc.) and just completely replace it. 1 hour job tops.