Door Mirrors
Thread Starter
Junior Member
Joined: Mar 2019
Posts: 11
Likes: 1
From: Middletown, Ohio
Door Mirrors
I broke one of my door mirrors and I bought a after market set with turn signals I installed them and no lights? I was reading I need to swap a pin out to make them work does anyone know what pin needs moved or what I can do to make the turn signal work on mirrors?
Senior Member
Joined: Jul 2012
Posts: 583
Likes: 66
From: Utah
Mine was the ground. It had to move from one side of the plug to the other. The Mirror side of the plug, not the trucks plug.
5 Year Member
Joined: Dec 2015
Posts: 1,825
Likes: 397
From: Brantford Ontario
Don't quote me....just going from memory from quite a while ago....I think you got to add a turn signal wire into your plug...(not mirror side of plug)
again if memory is right it is a blue or purple wire that is your turn signals....Hopefully somebody will chime in with more knowledge...Good Luck
again if memory is right it is a blue or purple wire that is your turn signals....Hopefully somebody will chime in with more knowledge...Good Luck
DangerBro2
Joined: Oct 2011
Posts: 77
Likes: 18
From: Dayton, Oh
What year/ model truck do you have? I got a set of 2009-2014 aftermarket mirrors for my 2007 lariat and the were plug and play. Did you have a rear facing turn signal before? Perhaps its not supported if it a work model or something...