Recon LED Tail lights
#1
CCDA_10
Thread Starter
Join Date: Dec 2009
Location: Texas
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Recon LED Tail lights
I received my Recon LED Tail lights today for my 07 F150. Being excited to see how they looked installed, I went to put them on and quickly found out that they were not "Simple Plug and Play" like they advertised on their website and the box the lights came in!!! Does any have Recon LED Tail lights on a 04-08 F150, if so PLEASE HELP ME!!!!
#2
Senior Member
I had one on my '03 but i can't imagine its much different, what all'd you have to do to make it work? mine plugged in the back for the brake, running lights and blinker but the reverse white lights had to be wired into the trucks actual reverse wire goin to the taillights
#3
CCDA_10
Thread Starter
Join Date: Dec 2009
Location: Texas
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Well i haven't done anything to them yet, i still have my factory tail lights install. But the factory plug is completely different from what is supposed to attach to the LED tail lights. The reverse light just uses old factory bulb...it just goes into the housing and locks in place, so i'm good on that
#5
Member
I received my Recon LED Tail lights today for my 07 F150. Being excited to see how they looked installed, I went to put them on and quickly found out that they were not "Simple Plug and Play" like they advertised on their website and the box the lights came in!!! Does any have Recon LED Tail lights on a 04-08 F150, if so PLEASE HELP ME!!!!
#6
Senior Member
I am sure that if you posted pics on here, some of us would be able to help you figure it out (especially if you dont want to go through the hassle of returning them).
#7
Mark
iTrader: (1)
How about a part number or a pic...my recon LED tails were plug and play for my 08
Trending Topics
#8
CCDA_10
Thread Starter
Join Date: Dec 2009
Location: Texas
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Ok, I figured out what I was doing wrong. My first mistake was not opening both boxes (the instructions were in the box I did not open). Second, I thought I was supposed to completely unplug everything from the wiring harness. Third, I didnt ask a machanic, and I do not know a whole lot about lights. But after I talked with one and opened up both boxes and found the instructions and emailed Recon, I finally figured out how to install them properly.