I have a 2008 f150 crew cab that has what is called the bench seat option up front. It has a column shift and a little seat in between the two captains chairs that folds down to make an armrest. My question is if anyone is familiar with the 40th year anniversarry option that came out in 2008 on these trucks that was a column shift but has a real nice center console setup between the same captains chairs... would it be possible to remove the little seat in my truck and replace with that nice setup that the 40th anniversary trucks have? Well thanks for reading this long post and any comments would be appreciated.

 

not sure, but your center console should just unbolt and u can bolt a new one on

 

mine has the center console with column shift. i believe the center jump seat unbolts and you can put one in. thats if you can find one to buy

 

Center jump seat - Yank up on the front of the seat, it will unsnap and you remove the 2 front bolts and the 2 rear bolts can be removed from the back seat area.

The center console - using the same 4 bolts you just bolt it in by accessing the holes from inside the console.


I did the conversion on my truck, same for all center jump seats/console swap.

 

Changing them out is simple. The only ones i can sometimes find are the scratch and dent ones on ebay.

If you go to a stealership it's over $1000 to get one. You have to order every part seperate and assemble it.

The scratch and dent ones on ebay are like $100 - $200

 

^^

Or post on these forums or other forums asking members if they want to do a swap. That's what I did and I shipped as well as the other member. Some members have the need for that middle seat.