I put a leveling kit on my rig and set of freedom offroad ucas... I'm ready for alignment... I'm looking at the truck stance and it looks like the camber is out some... Has anyone used the camber kits with any decent success?

 

I used them on my 05 2WD F150 after I installed a leveling kit. I had the alignment shop install them when doing the alignment. Still good 1 year later.

 

I made my first set when I aligned my '07 after lowering it a little, they are still in place but mine aren't adjuster easy, more like they just hold it where I set it. I bought a set of these for if / when it needs alignment again. They do make it hugely easier to pull the lowers inward precisely without using a come-along. Once in place and set, they will lock LCA camber nuts down, but with the offset washer and plate under it that locates in a hole, they will let the guy do it adjust with wrenches. Those plates have pins on the back side that go in holes in your truck.

 

Thanks.