Blend door actuator fuse
Anybody know which fuse it is some state 5,15 or 30 it's a 2004 fx4. Not getting power. Heat is on and the door is not opening toy all ow a.c. in. A.c. is good tossed gauges on and good pressure range when cyciing. Lines cold.
took actuator out and it's good. The owners Manual gives no indication of what fuse it is. It could be the hvac control. I know the cyclicing procedure to calibrate. But unsure of fuse.
took actuator out and it's good. The owners Manual gives no indication of what fuse it is. It could be the hvac control. I know the cyclicing procedure to calibrate. But unsure of fuse.
heat works fine along with the directions for where the heat is applied but outside air threw vent does not work. its raining again so ill wait to start pulling fuses.
Like the typical moron that looks for the problem in the wrong place actually in the possibilities and not where I started I found the problem. After pulling and testing the actuator and the controls I finally pulled the 5 fuse. Looked okay but it had some black crud on it like a stain. I cleaned it put it in and I Now have cold air. Lesson learned start with the source and work to the end. I checked everything but the fuse gauged the air. Pulled the actuator,r ran circuit checks. Only thing good that came from this was I changed the location of my sirius sntenna
to the dash under mat. No but outs now
to the dash under mat. No but outs now






