hmaspec

Hi
Have a tune up done on stock 2007 f150 Harley with the saleen supercharger upgrade, unable to find the correct belt for this application, have new tensioners and ac compressor. I'm in Hawaii if that helps. Thank you. Howard

Blown Ford

You should be able to use Goodyear Gatorback P/N 4061130 or Gates belt P/N KO61130. These are both 6 rib 113" long belts. I believe thats your factory length. Can you measure your current belt to make sure? Also the belt length could vary if any pulley changes have been made. Heres a cross reference guide to other manufactures and part numbers that cross over to the ones I posted. 8th up from the bottom of the list.
http://crossbelts.com/serpentine/6ribkseries.html

Blown Ford

Also while your replacing the tensioner you can break off the limiter tab on the tensioner and run 112.5" belt which will reduce belt slip. 112.5" belt is goodyear P/N 4061125.
This procedure is actually part of the install manual for the Whipple supercharger and is part of an upgrade kit for Saleen blowers sold by JDM.

Especial86

iTrader: (1)

Here's a pic of what blown is talking about.

Especial86

iTrader: (1)

Just got my tensioner done today on my mini mill, figured I'd share...