Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

Airbag Light Problem

Thread Tools
 
Search this Thread
 
Old Jul 15, 2013 | 05:16 PM
  #1  
Lando_Calrissian8's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2013
Posts: 5
Likes: 0
Default Airbag Light Problem

The other day I installed a reverse camera in my 2004 FX4 F150. When I finished up and got everything back together, I would receive 5 beeps, 5 times.. 25 total. I've read that this could be a fault somewhere with the airbag system. What I think, and hope the problem is, is when I took off the face plate surrounding the radio and unplugged everything, I possibly dropped and lost a clip that plugs the wires into where the "passenger airbag" light displays. There are two small wires that apparently plug into a clip, that then clips into the dash where the light is. Can anyone help me out and help me find one of these clips!? I've tried Autozone and Advanced Auto Parts.
Attached Images  
Reply
Old Jul 15, 2013 | 07:11 PM
  #2  
ophidia's Avatar
Senior Member
 
Joined: Apr 2013
Posts: 172
Likes: 17
From: West Fargo, ND
Default

Junkyard surfing might be your best bet.
Reply
Old Jul 15, 2013 | 08:59 PM
  #3  
18_F-150_XLT_Screw's Avatar
Senior Member
iTrader: (1)
 
Joined: Mar 2011
Posts: 794
Likes: 55
From: Charleston, WV
Default

Originally Posted by Lando_Calrissian8
The other day I installed a reverse camera in my 2004 FX4 F150. When I finished up and got everything back together, I would receive 5 beeps, 5 times.. 25 total. I've read that this could be a fault somewhere with the airbag system. What I think, and hope the problem is, is when I took off the face plate surrounding the radio and unplugged everything, I possibly dropped and lost a clip that plugs the wires into where the "passenger airbag" light displays. There are two small wires that apparently plug into a clip, that then clips into the dash where the light is. Can anyone help me out and help me find one of these clips!? I've tried Autozone and Advanced Auto Parts.
Found this: http://www.f150online.com/forums/int...off-light.html

Do you mean you lost the wiring or the plastic piece on the end of the wires?


You could always do something like this and solder two wires with blade connectors and then add the female end on the other side and make your own connection...
Reply
Old Jul 16, 2013 | 09:11 AM
  #4  
Lando_Calrissian8's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2013
Posts: 5
Likes: 0
Default

I lost the plastic piece at the end of the wire. I thought about soldering the two wires to it, but wasn't sure if i would be capable of doing it correctly or not. Don't want to blow the air bags on accident.
Reply




All times are GMT -4. The time now is 12:41 AM.