advice to for engine?
#1
Senior Member
Thread Starter
advice to for engine?
My truck seems to be running lean! When I accelerate, it stalls for about a second and then go's faster. This only happens when I want to go faster to pass a car. Also the engine seems to make like a breathing noise until I shifts to 4th! So any ideas to make my truck run like New? I can't even burn tire if I wanted to! Throw me some ideas to switch, part wise.
Trending Topics
#8
How do you know it is running lean? A hesitation and then going is not a lean sign. This could be the drive by wire?
Do you have a code reader?
What mods, if any, have been done?
How often is oil changed, what oil is used?
What air filter is used?
Have you cleaned the throttle body?
Have you cleaned the maf?
Have you changed your fuel filter?
Have you changed wheel size?
I would suggest cleaning the maf and tb, fuel filter, if using an oily filter, throw it away and pop a paper element back in. Try to calibrate the TPS as well, there is/was a sticky here on that. Also try to clear the KAM.
Do you have a code reader?
What mods, if any, have been done?
How often is oil changed, what oil is used?
What air filter is used?
Have you cleaned the throttle body?
Have you cleaned the maf?
Have you changed your fuel filter?
Have you changed wheel size?
I would suggest cleaning the maf and tb, fuel filter, if using an oily filter, throw it away and pop a paper element back in. Try to calibrate the TPS as well, there is/was a sticky here on that. Also try to clear the KAM.
#9
Senior Member
Thread Starter
How do you know it is running lean? A hesitation and then going is not a lean sign. This could be the drive by wire?
Do you have a code reader?
What mods, if any, have been done?
How often is oil changed, what oil is used?
What air filter is used?
Have you cleaned the throttle body?
Have you cleaned the maf?
Have you changed your fuel filter?
Have you changed wheel size?
I would suggest cleaning the maf and tb, fuel filter, if using an oily filter, throw it away and pop a paper element back in. Try to calibrate the TPS as well, there is/was a sticky here on that. Also try to clear the KAM.
Do you have a code reader?
What mods, if any, have been done?
How often is oil changed, what oil is used?
What air filter is used?
Have you cleaned the throttle body?
Have you cleaned the maf?
Have you changed your fuel filter?
Have you changed wheel size?
I would suggest cleaning the maf and tb, fuel filter, if using an oily filter, throw it away and pop a paper element back in. Try to calibrate the TPS as well, there is/was a sticky here on that. Also try to clear the KAM.