Hi y'all been having a problem with the abs system on my 06 king ranch took it to the stealership had the codes read came up with c-1230 wheel speed sensor rear ( replaced it with a new sensor ) and the other code is u-1900 unable to communicate. Figured it needs the abs module repaired or replaced. Question is if I replace it with another module will I need to get the system reflashed? By the way this all started when I replaced the battery. Thanks for all your input. And another question is , is there an in-line fuse to the abs module I did check all the fuses on the fuse block.

 

If you do change out the ABS module, you will have to reflash. I tried different abs modules off junked vehicles and ebay and the only way to really get it fixed it get one through the stealership. They charged me 90 bucks to reflash. I was getting all sorts of codes when mine was bad, plus the truck was going to into fail safe mode. Not a good feeling.

 

Guess I should go ahead and have this rebuilt