I have a 2006 f150 and my abs light came on this morning on my way to work I checked the fuse and it's good I was just wondering what I should check next and the best way to check it thanks in advancs

 

need a scan tool thats capable of reading abs codes

 

Ok thanks I was hoping there was I way I could check the sensors with a multimeter or anything lol do you know if autozones code reader read them

 

no not usually

 

Ok thanks you

 

I just had my light come on today during a long drive. Went out after stopping for gas, but came on about 30 mins later. After researching it looks like you either need the correct code reader like mentioned before or you can test with a multi meter. The video i watched showed the guy disconnecting the sensor from the harness going into the ecu. The sensor apparently has 2 wires in the plug and he tested them for resistance using a multi meter. If there is 0 or little resistance when rotating the wheel, the sensor is bad. If there is resistance (his was 535 i believe) then the sensor is ok. Like i said, this just happened to me and I haven't even touched the truck. Just sharing my Youtube research results!