4wd not locking in
either your IWE solenoid is not releasing the vacuum to lock the iwe's in or your iwe's are cooked I replaced both mine and solenoid it's not to hard pm me for details on how to replace them it you do they are 150$ each.
Mine did the same thing. The solenoid was frozen. Pull the vacuum lines off the solenoid if the fronts lock up its the solenoid.
If its the solenoid pop the cap on top of the solenoid. There is a small hole get an allen wrench that fits in there and push down with the solenoid deenergized. The rubber seal on the piston had stuck to the seat.
Or you can go buy a new solenoid with the rain guard on it for about $40
If its the solenoid pop the cap on top of the solenoid. There is a small hole get an allen wrench that fits in there and push down with the solenoid deenergized. The rubber seal on the piston had stuck to the seat.
Or you can go buy a new solenoid with the rain guard on it for about $40


