Wheres the best place to get these? i don't wanna go to a u pull it... and 25 bucks each seems high from the dealer need 4. Anyone have a set laying around? Has anyone gone to orileys or autoaone and just gotten them from there? Ive read em is the way to go

 

TSC

 

Que

 

Any suspension shops near you. The just make them from threaded stock. Cheapest and best option.

Why do you need them? What happened to yours?

 

Found a suspension shop but they need exact dimensions to make them for me. Anyone know ? Removing the block off my mother in laws truck ....

 

Measure and run by a Napa store... If they have any u-bolts in stock the part numbers are on the boxes. The Store/DC stocks the most common ones... If not, read below... Pretty self explanatory.

First number is bolt diameter, second is the axle tube diameter, third is the length of the bolt.

NAPA PART NUMBER THREAD Ø / AXLE TUBE Ø / LEG LENGTH (* SEE NOTE BELOW)
650-4082 3/8*2.0*4.0
650-4079 7/16*2.0*6.0
650-4012 7/16*2.50*6.5
650-4023 7/16*2.75*6.75
650-4026 7/16*2.81*8.0
650-4075 7/16*3.0*7.5
650-4022 7/16*3.12*6.75
650-4076 1/2*2.5*8.25
650-4003 1/2*2.88*7.0
650-4077 1/2*3.0*11.75
650-4028 1/2*3.0*8.0
650-4001 1/2*3.13*6.50
650-4014 1/2*3.25*9.0
650-4002 1/2*3.50*7.50
650-4025 1/2*3.5*8.0
650-4053 9/16*3.0*7.25
650-4078 9/16*3.25*8.0
650-4036 9/16*3.37*7.0
650-4041 9/16*3.37*8.0
650-4034 9/16*3.37*10.0
650-4080 9/16*3.75*8.0
650-4081 9/16*3.75*12.75
650-4044 5/8*3.0*7.5
650-4050 5/8*3.01*8.63
650-4051 5/8*3.0*9.63
650-4052 5/8*3.0*11.63
650-4045 5/8*3.25*8.50
650-4042 5/8*3.25*9.0
650-4038 5/8*3.25*13.0
650-4049 5/8*3.25*8.50
650-4053 5/8*3.50*9.50
650-4054 5/8*3.50*10.50
650-4055 5/8*3.50*11.50
650-4056 5/8*3.63*7.50
650-4057 5/8*3.63*8.50
650-4058 5/8*3.63*9.50
650-4059 5/8*3.63*10.50
650-4060 5/8*3.63*11.50
650-4037 5/8*3.75*8.50
650-4035 5/8*3.75*10.0
650-1050 3/4*3.0*18.0
650-1052 7/8*3.0*14.0
650-1054 7/8*3.5*14.0
650-1055 7/8*5*14.0
650-1056 7/8*3*18.0
650-1057 7/8*3.5*18.0

 

I don't have a stock one the measure I only have access to 4x4 u bolts (longer ones) I wished I knew someone with a 2wd that I can just swap haha. I'll keep doing some research

 

I've got some if you're interested, pm me

 

They are an inch and 5/8 shorter than 4 WD U bolts... Tractor Supply stocks then also.

 

Sometimes these guys are just stupid.

I went through the same issue when I lifted my old Chev truck. He wanted dimensions. I asked if he could make stock ones without dimensions and he said yes. So I then told him make me new ones two inches longer than stock

He was a little pissy at me pointing out his stupidity but he did it.
Ask if they can make stock, when they say yes tell them to make stock minus whatever the block is you are taking out.