If I use the switches on the drivers side, I can roll down all 4 windows, but if I use the other 3 switches, I can't move the windows. Only the drivers switches will operate the windows. And the other switches aren't illuminated. Any ideas?

 

Ttt

 

check fuses, first thing. if they are all good make sure your getting power there with a multimeter. if thats good, your switches are probably bad. ebay.

 

What fuses? I've already checked a ton. And is it practical that all the switches are bad? The lock out passes 12v so its not that

 

Check your main switch (drivers door), I am pretty sure (but not positive) that all the power goes there before being distributed to the other switches. Also check the wire boots inside the doors between the doors and the frame. I had this issue in my regular cab and I had a broken wire in the driver door boot.