tdg0830

I have an 05 FX4 Screw and I am running factory wheels and tires. I want my truck to sit level or a little below in the front but definitely not higher.

What size do you guys suggest?
Any kit in particular?

f150dude

Don't do the 2.5" or it will sit higher. Go with the 2". I had a 2" on my truck till i had to remove it because one of the studs snapped off. It had about 1/2" rake and it looked perfect. I am going to buy the Auto springs Powder coated kit. I think they are the strongest.

kozal01

iTrader: (2)

i think im going with the 2" as well, i just dont want the truck to look like its sagging when hauling a trailer. a little rake isnt bad, but there is just too much of it from the factory.

tdg0830

who do you buy from?

ford4wd08

get the autospring off ebay, great kit well built, ive got the 2.5", you can get the powdercaoted kit for 80 bucks with free shipping

kozal01

iTrader: (2)

this guys a vendor on here
http://www.topguncustomz.com/Store/G...view=249981986

BigBlack08XLT

I got the 2" powdercoated autospring set and like it. The truck sits level.

chashlls150

My HBS 2.5" just got here today. Im gonna install it on friday then head to the tire store for my 295/70/17 nitto a/ts

skfullen

I went with a 2" and the truck is perfectly level. It sits a little low in the back when towing, but not much.

I'd like to see pics of the Nitto tires when you get them installed.

PawPaw

The autospring kit's are hard to beat for the price. You also may want to check out the Bilstein 5100 series shock's that level the front up to 2 inches. If you need shock's this may be the best choice but they run about $200-250 for a pair.