07 mode control issue
Thread Starter
Junior Member
Joined: Aug 2013
Posts: 1
Likes: 0
07 mode control issue
First let me say I have replaced mode control actuator and removed the foam that initially was stuck in the door.
I also checked the arms at the mode actuator and they move freely. The lower has more range then the upper. (NORMAL??)
Still have no control of the mode get some air out of the floor, minimal flow out of the defroster, these are at all times.
Fuse is good.
ANYONE HELP!!
I also checked the arms at the mode actuator and they move freely. The lower has more range then the upper. (NORMAL??)
Still have no control of the mode get some air out of the floor, minimal flow out of the defroster, these are at all times.
Fuse is good.
ANYONE HELP!!