05 F150 5.4 keeps dieing
04-11-2018, 07:42 PM
#1
Junior Member
Thread Starter
Join Date: Jun 2016
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
05 F150 5.4 keeps dieing
I have a 05 Ford F-150 5.4 new plugs coil packs air filter battery starter both vct and seals and both camshaft sensors replaced also no cats I have P0345 P0349 still and my truck starts up and will run but when I put into reverse or drive it bogg downs and kills it self no matter how much I hit the gas light or floor it just Boggs down and dies when in park I can rev it all day but when in gear just dies and sometimes it woulnt start back up have to wait awhile then try again alternater tested good starter new battery new both also tested good any ideas??? Also there is no brakes in the wiring I checked and all plugs are snapped in
04-12-2018, 06:19 AM
#2
Senior Member
I haven't looked up the codes, but seems fuel related.
Check your fuel pump driver module first.
Have to ask what plugs and coil cops did you put in it? Did you change boots/springs?
How many miles?
Check your fuel pump driver module first.
Have to ask what plugs and coil cops did you put in it? Did you change boots/springs?
How many miles?
04-12-2018, 07:50 AM
#3
Junior Member
Thread Starter
Join Date: Jun 2016
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
code are for camshaft position sensor bank 2
and camshaft position sensors intermediate bank 2 but iv already replaced both camshaft sensors and reset engine light and it comes back on with same codes
04-12-2018, 10:07 AM
#4
05 5.4l 3v s.crew lariat
Not much meat here to work with
Did you replace boots on plugs .
I would clean maf and take off throttle body and clean it .
I would replace fuel filter under drivers seat as a good maint item .
You might want to use a android phone and Bluetooth code reader and download torque pro for 5 bucks . View real time data and show screenshots on here .
I would clean maf and take off throttle body and clean it .
I would replace fuel filter under drivers seat as a good maint item .
You might want to use a android phone and Bluetooth code reader and download torque pro for 5 bucks . View real time data and show screenshots on here .
04-12-2018, 02:50 PM
#6
Junior Member
Thread Starter
Join Date: Jun 2016
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
truck would not start both cats were clogged put the straight then it will run but when tried to put in gear it will die and then replaced all 8 plugs and coil packs motorcraft brand camshaft sensors and vcts and still having this problem