hey all... i have a 2010 f150 FX4 and currently running 305/65/18 BFG's with a rear block and add a leaf and the rancho quick lift in the front.. I have a new set of toyo mt's ordered 35/12.5/18. my question what is the lowest offset i can go with just trimming of the plastic wells? I know my truck has +44 offset, can i get away with a 0 offset? or maybe a -12? how much will these stick outside the fender? Thanks

 

No one?????

 

Sorry I don't have the answer but am interested as well. Right now running 305/55/20 with 0 offset. I want to go 35" now that I put my f150lifts ultimate kit on...it's set a 3". I know some guys run 35s with a 2" or 2.5" level just not sure what offset wheels most people are running

 

check this link and see if it helps. at the very end of the first post under the words "updated chart" is a link to a bunch of information you may find helpful.
https://www.f150forum.com/f38/tire-w...9-newer-68155/

 

I really thought i would get a bunch of comments on this topic...

 

You would in the right section!

There is a wheel and tire section in the aftermarket parts section.

 

You will probably want to stay modest on offset with only 1.5 inch lift on front. I would recommend a +30mm to +18 offset for least amount of plastic trimming. -12mm would stick out over 2 inches more than your current setup .