as i was pulling out of my drive something didn't seem right with my camera and it took me a few seconds to see it. somehow, with no changes made to the truck, my camera's display has reversed, but side to side not up and down. for instance as i am backing out my drive the house is on the passenger side, driver side is 10' tall row of bushes. however on my displace the bushes are on the passenger side and house on the driver. top to bottom display still works fine. i also seemed to have lost the distance meter visual aids on my display. i went though all the setting and they are all turned on but nothing displays.

anyone ever experienced this?

 

this morning all was back as it should be. about an hour after i got to work i had to run out and now the screen is filled with vertical lines distorting the picture. it's covered under my warranty so in to the dealer it goes i guess...

 

Reverse pic is a common issue when it's dying, I believe.

 

Replace the camera don't buy from Ford there almost $300 get a aftermarket one there about $ 75 and both ford and aftermarket are made in China
You have to break the badge off to get to the camera you can glue it back on or get a overpriced on from Ford

 

nope....

already replaced for free ( i long, long ago exceeded the cost of the extended warranty with other repairs).

 

My camera bluescreens most of the time anymore. It seems to be pretty common for these trucks to have camera issues.

 

That's usually a wiring issue. Check the wiring in the rear of the truck for damage.