Upgraded to Sync 3
#1
Senior Member
Thread Starter
Upgraded to Sync 3
Last week I found a smoking deal on eBay for a Sync 3 screen and APIM with no NAV. I bought the USB Hub and wiring adapter, and for less than $500 I am finally rid of My Ford Touch!
The following users liked this post:
Piney68 (01-21-2019)
#5
Senior Member
Thread Starter
https://www.4dtech.com/sync-3-retrof...dapter-gen-2a/
https://www.4dtech.com/large-to-medi...pter-sync-2-3/
https://www.4dtech.com/sync-3-usb-me...rplay-support/
These are what you need. (Can be found a lot cheaper on Ebay.)
If you have NAV you also have to change the GPS antenna, but I did not have nav on this one.
After installing, I hooked up to FORSCAN and entered AS built data that I got on this site and everything worked.
#6
Senior Member
Thread Starter
See above. Any Sync 3 screen and APIM will work. You just have to reuse your stock brackets. Change the USB hub and get the wiring adapter, and program it with FORSCAN.
#7
Senior Member
Thread Starter
It's called EASYGO Smartkey. This is what I bought. It's discontinued, so theres not a lot of info on it, but the starter is plug and play, just have to wire up the locks etc like any other alarm. It actually mounts where the 4x4 switch goes, but I didnt want to move that, so I put it where the TBC went, as I never tow anything
Works just like a factory system with a proximity key.
https://www.ebay.com/itm/EasyGO-AM-F...wViT:rk:3:pf:0
Trending Topics
#8
Just curious - how much did you pay for the Screen & APIM? I paid $499 back in November 2017 when I did mine. Selling one on Ebay right now for $515 I pulled out of a 2017 Mustang and it's been sitting for a bit....
#9
Senior Member
Thread Starter
#10