Upfitter switch install in FX4
USMC
Joined: Dec 2014
Posts: 18
Likes: 1
From: Houston, TX
Long time reader, first time poster
so glad you posted a photo of this-I've seen everyone post photos where the trailer brake is and then cut out here or there. I've seriously been looking at something like this since I purchased my FX4..love that gray
Have you had any success lately with getting further on the install?
I'd very much like to do it in this location and am curious if you could provide more details.
Thanks bud
Have you had any success lately with getting further on the install?
I'd very much like to do it in this location and am curious if you could provide more details.
Thanks bud
Thread Starter
Junior Member
Joined: Jan 2014
Posts: 18
Likes: 2
Progress update
I have all of the things to finish the install but recently moved from CA to VA and still getting settled. I need to finish the job correctly. I have one switch connected to some bed lights to make sure my switch wiring was correct but needs to be cleaned up. I also bought a waterproof enclosure to mount the relays in but never found a spot under the hood to mount the box. I am currently considering buying the small aux relay setup from the raptor to complete the install. The goal has always been to make this look like a factory install.
Senior Member
Joined: Nov 2010
Posts: 11,854
Likes: 2,559
From: Timbuk3, MI
Morghill - How did this turn out? and do you have part# to the parts you used? just picked up a 2014 F-150 and I will be copying your install! sweet.
.
Senior Member
Joined: Nov 2010
Posts: 11,854
Likes: 2,559
From: Timbuk3, MI
Senior Member
Joined: Nov 2010
Posts: 11,854
Likes: 2,559
From: Timbuk3, MI
Mikey993 - How did you wire it up
e3troy ... I ordered the relays for the switches and they should be in later this week. I'll post again when the wiring project is complete.
.
Last edited by gDMJoe; Oct 10, 2015 at 11:51 PM.