OK, I put in an upfitter two years ago in my 2011 F150, and it fried. The new one I got from Amazon has different wire colors on the 8-pin connector. I previously cut off the connector and wired it to the battery as I didn't want to mess with the factory fuse box, etc. Whether that was right or wrong,it is what it is. After two years, I don't remember which wire went to what on the 8-pin connector. Does anyone have a diagram of which wires are for what on the 8 pic connector?
Thanks in advance.

 

Upfitter switches? I almost went with these but ended up with kcustoms switch panel instead. While I don’t have a wire diagram I would recommend wiring in some relays to help keep the new one from frying as well.

 

Yep, I already planned that once I get it wired up. In fact, I would wire it up without my relays if I could get the wiring diagram and just use my own relays. Why do it twice?

 

Here is the Raptor factory connector:

 

i got er done, thanks for the diagram.