When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I didn't have a tow package on mine but after going through my truck found what looks like all the necessary wires for the OEM TBC, under the dash and above the spare tire
there's also a yellow wire under that blue one, this is the side thats coming from the engine area, then from there it has a pig tail that goes to the basic flat 4 plug
These are all this wires I would need right?
Last edited by Sirikenewtron; Jul 9, 2015 at 04:57 PM.
Thanks guys ya I only want the Orem I had it on my 08 f350 king ranch and it works way better then any other ones. My auto head light don't seem to come on until it gets to dark wonder if they can fix that too.
All I know is my 2013 King Ranch display looks like the pics below I pulled off the internet:
The pic below is for a SuperDuty but looks just like my F150 (except for the info on the bottom of the screen about diesel fuel):
In the pictures you can see the miles accumulated on the trailer and the ITBC output to the trailer brakes.
Also, it says "Push OK for options", and when you do that you can set up a trailer, select a different trailer, rename it, delete it, etc.
.
I have this display too, but didn't come with the brake controller. I thought it was odd that it would have all the programming and still not include the controller.
I didn't have a tow package on mine but after going through my truck found what looks like all the necessary wires for the OEM TBC, under the dash and above the spare tire
there's also a yellow wire under that blue one, this is the side thats coming from the engine area, then from there it has a pig tail that goes to the basic flat 4 plug
These are all this wires I would need right?
I see turn right, turn left, stop, running lights, but not sure what other wires do but not seeing either 12 volt or brakes. I might be wrong but I think your missing a wire?
Last edited by blueovelboy; Jul 11, 2015 at 04:08 AM.
I see turn right, turn left, stop, running lights, but not sure what other wires do but not seeing either 12 volt or brakes. I might be wrong but I think your missing a wire?
My Ford Genuine has never let me down. Installation is super easy. Just plug it in and go. Suitable For Gas or Diesel Engines. Being proportional and inertial, once it is adjusted to the way you like, you'll never have to touch it again.
Last edited by robmandeville143; Aug 19, 2021 at 06:24 AM.
I am looking to put the oem brake control on my 2012 f150xl the connector is under the dash and the wires go back to the axial. IA DEALER TOLD ME I coundn't put the oem on after i gave him my vin. the truck has the tow haul button on the end of the shift columb and it works. Will I be able to put the oem control on my truck and use forscan to flash the computer
I am also in the process of doing this to mine, I ordered the controller from a Ford dealer and installed it, the wire harness was taped under the driver side dash as previously mentioned.
Will be installing the 7 way plug tomorrow, as I need it to pull a trailer this weekend, and then make the appointment to have it turned on by the local dealer.
