Tire and Wheel Fitment Guide - 2009 and newer
#5693
Member
#5695
Does anyone know what kind of socket/lug wrench I'd need for Fuel Tritons? The shop said they have the wrench that will work but figured I would try and figure out what is different about it and try to compare prices else where.
#5696
Bilstein 5100 leveling kit - one step short of max level (~1.75")
Method NV wheels - 17x8.5 0mm offset
Nitto Ridge Grappler 285/70 17 - No rubbing, no trimming needed
From the OE 18" wheels and 275/65 tires, these are quite a bit heavier (about 8-10lbs per corner), so fuel economy has dipped a bit. I added StopTech slotted front/rear rotors and pads to help stop the extra mass better than stock. The Nittos ride nice and are relatively quiet for how aggressive the tread is.
Method NV wheels - 17x8.5 0mm offset
Nitto Ridge Grappler 285/70 17 - No rubbing, no trimming needed
From the OE 18" wheels and 275/65 tires, these are quite a bit heavier (about 8-10lbs per corner), so fuel economy has dipped a bit. I added StopTech slotted front/rear rotors and pads to help stop the extra mass better than stock. The Nittos ride nice and are relatively quiet for how aggressive the tread is.
The following users liked this post:
ctimrun (02-23-2023)
The following users liked this post:
RubyF150 (04-20-2019)
#5698
2014 f150
On a stock hight 2014 4x4, can i fit -12 wheels with stock size tires265/70-17? If so how far will they stick out, and will i rub?
Last edited by Derek Peltzer; 04-20-2019 at 11:34 PM.