Since all factory wheels in 2013 are +44 offset, they should all be the same distance to the control arms with same tires. Custom Offsets is telling me that 33/12.50r22 Ridge Grapplers WILL rub my control arms with my stock Limited wheels. Lots of people on here are running 33/12.50 and 35/12.50 tires on stock wheels and not having problems. I'm not afraid to do some trimming on plastic pieces with bigger tires but I'm worried about rubbing on the control arms. I'd love to see pics of control arm clearance with 12.50 tires on stock wheels. I don't really want to order a $1500 set of tires and put them on the truck and then they rub on the control arms. Thanks, ladies and gentlemen!

 

How many times do you need your question answered before you make the decision?

 

I guess with a $55k truck, several times. Asking to see pictures of clearance doesn't hurt anything. I really want to know how much room I'm going to have if I go this route.

 

Im running 33/12 on my 20" FX4's. No rub. I don't see why you would have an issue on a 22" wheel. You would just have less sidewall.

I see this is your third thread about it, if you don't have enough verification from these threads, don't do it.

Worst case, you buy some spacers and a longer lug.