Supercrew Subwoofer Enclosure
#1
Supercrew Subwoofer Enclosure
Not sure if this the right place to post this, but here it goes anyway.
Does anyone have plans to build a sub box for a 09-11 screw. I am really just look for the best design for the side profile to make it look as close to factory as possible.
This is my idea. I would like a 10" down fire on the passenger side under the seat. But I would like to make the full width of the back seat and use the space that it is not need for the subwoofer as storage. So it would all be blended together under the seat.
Has anyone built or seen anything like this?
Worst case scenario, I guess I can just cut up some cardboard tell I get a shape I am happy with.
Does anyone have plans to build a sub box for a 09-11 screw. I am really just look for the best design for the side profile to make it look as close to factory as possible.
This is my idea. I would like a 10" down fire on the passenger side under the seat. But I would like to make the full width of the back seat and use the space that it is not need for the subwoofer as storage. So it would all be blended together under the seat.
Has anyone built or seen anything like this?
Worst case scenario, I guess I can just cut up some cardboard tell I get a shape I am happy with.
#2
Not sure if this the right place to post this, but here it goes anyway.
Does anyone have plans to build a sub box for a 09-11 screw. I am really just look for the best design for the side profile to make it look as close to factory as possible.
This is my idea. I would like a 10" down fire on the passenger side under the seat. But I would like to make the full width of the back seat and use the space that it is not need for the subwoofer as storage. So it would all be blended together under the seat.
Has anyone built or seen anything like this?
Worst case scenario, I guess I can just cut up some cardboard tell I get a shape I am happy with.
Does anyone have plans to build a sub box for a 09-11 screw. I am really just look for the best design for the side profile to make it look as close to factory as possible.
This is my idea. I would like a 10" down fire on the passenger side under the seat. But I would like to make the full width of the back seat and use the space that it is not need for the subwoofer as storage. So it would all be blended together under the seat.
Has anyone built or seen anything like this?
Worst case scenario, I guess I can just cut up some cardboard tell I get a shape I am happy with.
Check out the MTX Thunderform and also supercrewsounds.com. They have a couple different options for your truck!
#3
I bought an enclosure off a guy from eBay with a kicker cvt and kicker amp that is legit. You can't even tell it is there looking at it. When my buddies get in they can't believe it is only a single 10.
#4
5.4 FX2
I was going to post my audio build up soon. I built an enclosure that fits under the seat and is very blended with the truck. It houses two 10's on the edges and encloses the amp in the center cutout.
I will post the outside dimensions here but please understand it is a crude hand written note. I will give you a cleaner version later if you are interested. I should have the build up w/pics posted by the end of the week.
These dimensions make it fit as if it is a part of the vehicle when carpeted.
Edit..... I think the top was actually 1/4-1/2 wider front to back than the bottom. Start bigger cut down as needed.
I will post the outside dimensions here but please understand it is a crude hand written note. I will give you a cleaner version later if you are interested. I should have the build up w/pics posted by the end of the week.
These dimensions make it fit as if it is a part of the vehicle when carpeted.
Edit..... I think the top was actually 1/4-1/2 wider front to back than the bottom. Start bigger cut down as needed.
Last edited by Woo Sah; 11-14-2011 at 03:08 AM.
#5
Woo sah, that rough draw will be a great start point for me, save me some measurements. I look forward to seeing your set up.
I've checked ebay and supercrewsound, but cant find the set up i have i mind. I did email supercrew to see if they could build something, hopefully here from them soon.
I've checked ebay and supercrewsound, but cant find the set up i have i mind. I did email supercrew to see if they could build something, hopefully here from them soon.
#7
Senior Member
I wish I had a better pic for you. I had this sub box built from a guy on eBay for my '09. I upgraded to the Sony system in my '11 and have since sold this unit but I think this is what you might be looking for:
Trending Topics
#8
Sharper, that is pretty much what i want right there. Minus the amp cut out, both of mine will be mounted on the rear wall.
I may start laying it out tonight and build my own.
I may start laying it out tonight and build my own.
#9
Sharper, that is pretty much what i want right there. Minus the amp cut out, both of mine will be mounted on the rear wall.
I may start laying it out tonight and build my own.
I may start laying it out tonight and build my own.